Skip to content

[Full Version] 640-916 Exam Dumps Free Download In Lead2pass 100% 640-916 Exam Questions (81-100)

Posted in 640-916 Dumps, 640-916 Exam Questions, 640-916 New Questions, 640-916 PDF, 640-916 VCE, and Cisco

2016 November Cisco Official New Released 640-916 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

I have already passed Cisco 640-916 certification exam yesterday….Scored 984/1000 in US! Many new exam questions added into the 2016 640-916 test! So I just come here to share with your guys and wish more 640-916 candidates can pass easily!

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/640-916.html

QUESTION 81
Hotspot Question

811
812
Answer:
Explanation:
2338768 seconds
Use the "show vpc peer-keepalives" command to show vpc see the peer has been alive for 2338768 seconds.

QUESTION 83
Hotspot Question
831
832

833
Answer:
834
Explanation:
N7K-PROD-A has vPC role primary and N7K-PROD-B has vPC role secondary.
Use the "show vpc role" command on each switch to verify.

QUESTION 84
Hotspot Question
841
842

843
Answer:
844
Explanation:
00:23:04:ee:be:01
Use the "show vpc role" command to see the system-mac address.

QUESTION 85
Which ports on the Cisco UCS 6120XP Fabric Interconnects can operate at either 1 Gb/s or 10 Gb/s?

A.    Ports 1-4
B.    None
C.    Ports 1-6
D.    Ports 1-8
E.    Ports 17-20

Answer: D

QUESTION 86
Which two switches does Cisco recommend for small and medium-sized organizations to provide a cost-effective solution for the Fibre Channel SAN edge? (Choose two.)

A.    Cisco MDS 9250i
B.    Cisco MDS 9506
C.    Cisco MDS 9148
D.    Cisco MDS 9509

Answer: AC

QUESTION 87
Which two switches provide high-performance, multiprotocol, and multiple services for the Fibre Channel SAN core in the data center? (Choose two.)

A.    Cisco MDS 9124
B.    Cisco MDS 9506
C.    Cisco MDS 9222i
D.    Cisco MDS 9710

Answer: BD

QUESTION 88
Which four components are parts of the Cisco Data Center Nexus switching offering? (Choose four.)

A.    Cisco 6000 Series Switch
B.    Cisco ASR 9000
C.    Cisco 1000v Switch
D.    Cisco IOS Software
E.    Cisco 4500E Switch
F.    Cisco NX-OS Software
G.    Cisco 6509-E Switch
H.    Cisco Fabric Extender

Answer: ACFH

QUESTION 89
On the Cisco Nexus 5000, which three commands help verify network connectivity? (Choose three.)

A.    ping
B.    show interface brief
C.    show otv
D.    show vdc membership
E.    traceroute

Answer: ABE

QUESTION 90
Which three items are needed to perform the initial setup for a Cisco Data Center device? (Choose three.)

A.    IP address and network mask
B.    FTP password
C.    Active Directory password
D.    console cable
E.    device software licenses
F.    admin password to assign to the device
G.    SFP+ cables

Answer: ADF

QUESTION 91
Which settings are used to access the console port on the Cisco Nexus?

A.    9600, 8 data bits, 1 stop bit, No parity
B.    19200, 8 data bits, 1 stop bit, No parity
C.    9600, 8 data bits, 0 stop bit, No parity
D.    9600, 8 data bits, 1 stop bit, Parity

Answer: A

QUESTION 92
Which three items are control plane protocols? (Choose three.)

A.    OSPF
B.    UDLD
C.    CoPP
D.    IS-IS
E.    NAT

Answer: ABD

QUESTION 93
Which SAN port type allows multihop FCoE between two SAN switches?

A.    VN
B.    VE
C.    VF
D.    E

Answer: B

QUESTION 94
For which two reasons should customers deploy FCoE beyond the access layer? (Choose two.)

A.    higher throughput compared to traditional Fibre Channel
B.    better security than traditional Fibre Channel
C.    device consolidation
D.    FCoE cannot be deployed beyond the access layer.

Answer: AC

QUESTION 95
Which option describes what VNTags are used for?

A.    to separate broadcast domains
B.    to identify and separate virtual interfaces
C.    to prioritize FCoE traffic
D.    to extend a Layer 2 domain across a Layer 3 boundary

Answer: B

QUESTION 96
Which option describes the function of a Cisco Nexus 2000?

A.    positioned for access layer switching
B.    to expand the port density of a parent switch
C.    to provide edge routing
D.    to host virtual appliances

Answer: B

QUESTION 97
Refer to the exhibit. After you install and configure a Cisco Nexus 5548, you notice that you cannot ping its default gateway. Assume that your management interface is up and running, and other devices in the same subnet or VLAN can communicate with the default gateway.
971
Which statement describes the problem?

A.    The subnet of the management port is incorrect.
B.    The default route is configured incorrectly.
C.    You are using the incorrect cable.
D.    You must ping from the management VRF.

Answer: D

QUESTION 98
Which three components are needed to implement FCoE? (Choose three.)

A.    FCoE Initialization Protocol
B.    N_Port virtualization
C.    N_Port ID virtualization
D.    converged network adapter
E.    priority flow control

Answer: ADE

QUESTION 99
Which three devices support FCoE? (Choose three.)

A.    Cisco Nexus 5500
B.    Cisco Nexus 7000
C.    Cisco Nexus 3000
D.    Cisco Nexus 1000V
E.    Cisco UCS Fabric Interconnect

Answer: ABE
QUESTION 100
In a large enterprise, which two SAN switches are ideal core switches for providing high availability? (Choose two.)

A.    Cisco Nexus 5548
B.    Cisco MDS 9710
C.    Cisco MDS 9509
D.    Cisco Nexus 7028
E.    Cisco MDS 9222i

Answer: BC

Pass 640-916 is not difficult! But you need more practice tests, I spent 1 month prepared for this exam! Here is full version of the exam dump, I want to share with you, maybe it can help you a little bit:

640-916 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDd252MVQ5dGl0Smc

2016 Cisco 640-916 exam dumps (All 191 Q&As) from Lead2pass:

http://www.lead2pass.com/640-916.html [100% Exam Pass Guaranteed]