Skip to content

Month: June 2014

Latest VMware VCP550 Exam Dumps Free Download with PDF & VCE (61-70)

Posted in VCP550 Exam Questions, and VMware

QUESTION 61
An administrator is planning a new vSphere deployment using shared storage. The solution must support:
– vMotion
– Storage vMotion
– Fault Tolerant virtual machines
– VAAI primitives
– RDM disks
Which storage type will meet these requirements?

A.    CIFS
B.    iSCSI
C.    NFS
D.    vSAN

Answer: B

Latest VMware VCP550 Exam Dumps Free Download with PDF & VCE (51-60)

Posted in VCP550 Exam Questions, and VMware

QUESTION 51
A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 and
expand it to 4TB in size. The storage administrator has already expanded the underlying LUN to 4TB.
Which steps should the vSphere administrator take?

A.    Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5
B.    Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand
the datastore to 4TB
C.    Upgrade the datastore to VMFS5 and then expand it to 4TB
D.    Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand
it to 4TB

Answer: C

Latest VMware VCP550 Exam Dumps Free Download with PDF & VCE (41-50)

Posted in VCP550 Exam Questions, and VMware

QUESTION 41
A vSphere administrator assigns VLAN 3389 to the Production port group on the VCP_DCV_Example vSphere Distributed Switch. After the change, users report a loss of connectivity to their applications. Further analysis provides the following data:
– The cluster has not had a ESXi host failure.
– Application functioned normally prior to the change.
– The loss of connectivity occurred immediately following the change.
Which condition would cause this loss of connectivity?

image

A.    The physical switch ports used by the vmnics have not been configured with 802.1Q.
B.    Maintenance Mode was initiated on one of the hosts in the cluster. Connectivity will resume after the
virtual machines are migrated.
C.    All uplinks were removed from the VCP_DCV_Example switch and added to another virtual switch.
D.    A load balancing setting on the port group conflicts with the load balancing setting of the switch.

Answer: A

Latest VMware VCP550 Exam Dumps Free Download with PDF & VCE (11-20)

Posted in VCP550 Exam Questions, and VMware

QUESTION 11
The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host’s Networking Configuration tab is shown in the exhibit.

image
After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration?

A.    Remove the Production port group by accessing the properties for the port group.
B.    Remove the Production port group by accessing the properties for vSwitch1.
C.    Remove the Production port group by accessing the properties for the Network.
D.    Remove the Production port group by removing vSwitch1.

Answer: B

Latest VMware VCP550 Exam Dumps Free Download with PDF & VCE (1-10)

Posted in VCP550 Exam Questions, and VMware

QUESTION 1
What action should the vSphere administrator take to allow for a new vApp to be created in the cluster?

image

A.    Enable Distributed Resource Scheduling on the cluster
B.    Create a Resource Pool in the cluster, and create the vApp in the Resource Pool
C.    Enable High Availability on the cluster
D.    Create a new Datacenter, and create the vApp in the new Datacenter

Answer: A

2014 Latest 100% Pass Guaranteed Microsoft 70-412 Dumps (201-210)

Posted in 70-412 Dumps, and Microsoft

QUESTION 201
You have a server named Server1 that runs Windows Server 2012 R2. When you install a custom Application on Server1 and restart the server, you receive the following error message: "The Boot Configuration Data file is missing some required information.

File: \Boot\BCD
Error code: 0x0000034."
You start Server1 by using Windows PE. You need to ensure that you can start Windows Server 2012 R2 on Server1.
Which tool should you use?

A.    Bootsect
B.    Bootim
C.    Bootrec
D.    Bootcfg

Answer: C
Explanation:
A. Bootsect.exe updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR. You can use this tool to restore the boot sector on your computer.
This tool replaces FixFAT and FixNTFS.
B.
C. Bootrec.exe tool to troubleshoot "Bootmgr Is Missing" issue. The /ScanOs option scans all disks for installations that are compatible with Windows Vista or Windows 7. Additionally, this option displays the entries that are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7 installations that the Boot Manager menu does not list.
D. The bootcfg command is a Microsoft Windows Server 2003 utility that modifies the Boot.ini file.
http://technet.microsoft.com/en-us/library/cc749177(v=ws.10).aspx http://support.microsoft.com/kb/927392/en-us
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/error-code-0x0000034-in-windows-7/4dcb8d38-a206-40ed-bced-55e4a4de9bf2

2014 Latest 100% Pass Guaranteed Microsoft 70-412 Dumps (191-200)

Posted in 70-412 Dumps, and Microsoft

QUESTION 191
Your company has two offices. The offices are located in Seattle and Montreal.
The network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Server1 is located in the Seattle office. Server2 is located in the Montreal office. All servers run Windows Server 2012 R2.
You need to create a DHCP scope for video conferencing in the Montreal office. The scope must be configured as shown in the following table.

image
Which Windows PowerShell cmdlet should you run?

A.    Add-DchpServerv4SuperScope
B.    Add-DchpServerv4MulticastScope
C.    Add-DHCPServerv4Policy
D.    Add-DchpServerv4Scope

Answer: B

2014 Latest 100% Pass Guaranteed Microsoft 70-412 Dumps (181-190)

Posted in 70-412 Dumps, and Microsoft

QUESTION 181
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and configured. For all users, you are deploying smart cards for logon. You are using an enrollment agent to enroll the smart card certificates for the users. You need to configure the Contoso Smartcard Logon certificate template to support the use of the enrollment agent. Which setting should you modify? To answer, select the appropriate setting in the answer area.

image
Answer:

image

2014 Latest 100% Pass Guaranteed Microsoft 70-412 Dumps (171-180)

Posted in 70-412 Dumps, and Microsoft

QUESTION 171
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Both servers connect to the same switch.
Cluster1 hosts a secure web application named WebApp1. WebApp1 saves user state information in a central database.
You need to ensure that the connections to WebApp1 are distributed evenly between the nodes.
The solution must minimize port flooding.
What should you configure?
To answer, configure the appropriate affinity and the appropriate mode for Cluster1 in the answer area.

image
Answer:

image

2014 Latest 100% Pass Guaranteed Microsoft 70-412 Dumps (161-170)

Posted in 70-412 Dumps, and Microsoft

QUESTION 161
Your network contains an Active Directory forest.
The forest contains one domain named contoso.com. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.

image
DC1 has all of the operations master roles installed. You transfer all of the operations master roles to DC2, and then you uninstall Active Directory from DC1. You need to ensure that you can use Password Settings objects (PSOs) in the domain.
What should you do?

A.    Change the domain functional level.
B.    Upgrade DC2.
C.    Run the dcgpofix.exe command.
D.    Transfer the schema master role.

Answer: A
Explanation:
A. The domain functional level must be Windows Server 2008 to use PSO’s B. DC1 needs to be upgraded
C. Recreates the default Group Policy Objects (GPOs) for a domain D. Schema isn’t up to right level
http://technet.microsoft.com/en-us/library/cc770394(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh875588(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc753104.aspx

Free Download Latest 2014 Pass4sure&Lead2pass Oracle 1Z0-062 Exam Questions

Posted in Oracle

QUESTION 1
Which three statements are true about a job chain?

A.    It can contain a nested chain of jobs.
B.    It can be used to implement dependency-based scheduling.
C.    It cannot invoke the same program or nested chain in multiple steps in the chain.
D.    It cannot have more than one dependency.
E.    It can be executed using event-based or time-based schedules.

Answer: ABE
Explanation:
http://docs.oracle.com/cd/B28359_01/server.111/b28310/scheduse009.htm#ADMIN12459

OFFER Oracle 1Z0-100 PDF and 1Z0-100 VCE Full Version

Posted in Oracle

QUESTION 1
This MDADM output:

image
Which two aspects can be determined from this output?

A.    A device failed and has been removed from this RAID set.
B.    It is no longer possible to write to this RAID set.
C.    Read and write performance is no longer optimal on this RAID set.
D.    This RAID set was built without a spare device.
E.    Only Write performance is no longer optimal on this RAID set.

Answer: AD