QUESTION 11
A customer is commissioning a Communication Server (CS) 1000E 7x system with package 403 (soft switch) and 402 (IPMG). The CPDC Call Server software has been installed successfully, and now the customer is provisioning the Media Gateway Tone and conference loops for the Media Gateway Controller.
Which switch overlay and prompt should the customer use to configure the Media gateway TDS loop?
A. LD 17, XCT
B. LD 17, VXCT
C. LD 17, SUPT
D. LD 17, MGTDS
Answer: D
QUESTION 12
A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.
How does the customer access the configuration menu for the MGC?
A. Type “mgcsetup” on the screen.
B. No action required. The MGC will boot directly into the setup menu.
C. The prompt “Press any key to stop auto-boot enter mgcsetup” appears.
D. Enter a shell command : <CTRL>0<CTRL>M, provide OAM username and password to access
OAM shell.
Answer: B
QUESTION 13
A technician is installing a new Communication Server (CS) 1000E Rls. 7x system for a customer. The requirements include installation of IP telephones for a small group of inside sales people. The telephones have been configured and are ready to be registered.
Which two items are to be entered when performing the IP telephone registration? (Choose two)
A. The Directory Number
B. The Node ID
C. The Terminal Number
D. The Customer Number
Answer: BC
QUESTION 14
A customer with a Communication Server (CS) 1000E 5.5 HA system with IPMG systems and dual ISP 1100 signaling Servers is upgrading their system to release 7x. The ISP 100 Signaling Servers are being replaced with CPDC servers. The contents of the upgrade kit have been installed and the maintenance terminal connection has been established.
What are three other upgrades tasks to be completed? (Choose three)
A. Insert a large system security device.
B. Insert the bootable media into the faceplate.
C. Connect the card to the TLAN/ELAN subnets.
D. Place the CPDC card into an empty card slot.
E. Change the speed of the COM port to 19,200.
Answer: ABC
QUESTION 15
A customer with an existing Communication (CS) 1000E 6.0 system is upgrading to a CS 1000E Rls. 7x HA system. As a part of this upgrade, the CPPM Signaling Servers are being decommissioned and replaced with CPDC signaling servers.
Which two methods can be used to restore the original IP Telephony node configuration to the CS 1000E Rls. 7x HA system? (Choose two)
A. Import the original IP Telephone Node File from the upgraded Call Servers database.
B. Import the original IP Telephone Node File from the upgraded Call Server database.
C. Import the original IP Telephone Node File using an XML from the CPPM Signaling Server.
D. Import the original IP Telephone Node File the NRS database backup file
Answer: BD
QUESTION 16
A customer has Communication Server (CS) RLS. 7x system, and the technician wants to create an account capable of configuring a network Time Protocol (NTP) server.
What must be done to access the data and time parameters?
A. Click the reboot button in Base Manager to restart the system and access the date and time parameters.
B. Update the user role and permission mapping to include security Administrator and Time Administrator
access group.
C. Navigate to UCM and click the refresh icon to refresh the screen of properties to access data and time
parameters.
D. Update the user role and permission mapping to include Network Administrator access groups.
Answer: D
QUESTION 17
A customer that has an existing option 11C chassis system with an SCC card is planning t o upgrade to a Communication Server (Rls.) 1000E Rls. 7x system. A CPMG Co-Resident server card will be installed.
Which action must be completed manually?
A. The digital Trunk Numbers must be reprogrammed with a new format
B. The IP Phones Terminal Numbers must be entered with a new format
C. The IP address for each Ip media Gateway must be entered in LD 97
D. The tone Receiver Terminal Numbers must be re-Programmed with new format
Answer: C
QUESTION 18
You customer just installed three Communication Servers 1000 Rls. 7x systems to support their new campus distributed corporate offices. The customer allowed for periodic synchronization of their corporate Lightweight Directory Access Protocol (LDAP) database with subscriber Manager.
Which Subscriber Manager Feature allows you to synchronize subscribers from an LDAP database and assign them to a telephone account of the same time?
A. Bulk Account Creation
B. CSV Subscriber Synchronization
C. Account Synchronization
D. Flow-through Provisioning
Answer: D
QUESTION 19
Click the Exhibit Button. A customer has asked if the Communication Server (CS) 1000 Rls. 7x system can provide Executive users with the ability to selectively drop people that have been added to a conference.
Based on the print-outs and assuming the CSD key has been programmed and the class of service assigned is CDCA, which capabilities are currently available to the user of extension 2006?
A. The user cannot see the conferee display count or selectively disconnect callers.
B. The user can see the conferee display count and can selectively disconnect callers.
C. The user can see the conferee display count but cannot selectively disconnect callers.
D. The user cannot see the conferee display count but can selectively disconnect callers
Answer: B
QUESTION 20
A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?
A. The MGC display will read “PASS”
B. The MGC display will read “LOAD”
C. The MGC display will read “Exxx” (E000)
D. The MGC display will show Superloop and shelf number of MG 1000E
Answer: D
…go to http://www.lead2pass.com/7003.html to download the full version Q&As.
