QUESTION 51
You are installing a new Communication Server 1000E HA Release 7x system for your customer.
Which two lists can be created using the lists feature provided with the EM phones Tool? (Choose two)
A. Speed Call Lists
B. Dial Intercom Lists
C. Call Pickup Lists
D. Group Call Lists
Answer: AD
QUESTION 52
A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?
A. LD 137
B. LD 117
C. LD 97
D. LD 17
Answer: D
QUESTION 53
A customer has completed installing and configuring a new CPMG Co-Resident Platform. The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server. The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?
A. Log into the Gateway controller card using CLI and enter statSecDomain.
B. Log into the Gateway controller card using CLI and enter joinSecDomain.
C. Log into the Gateway controller card using CLI and enter registerSecDomain.
D. Log into the system and access Overlay 117 and enter register ucmsecure device.
Answer: B
QUESTION 54
A customer has a several analog telephones running of a Flexible Analog Line Card (FALC) in an IPMG. Users are able to receive calls on the telephone and have a conversation, however they cannot initiate a call as there is no dial tone.
What should be checked first?
A. Tone and digital loops (TDS), extended tone detector (XTD)
B. Physical connections, dsp resource availability, and tone loops
C. All tone and digit switch loops (TDS), IPMG registration status
D. All XTD and conference loops
Answer: C
QUESTION 55
A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.
What happens to the Terminal Number (TN) format during this upgrade?
A. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all
assigned Terminal Numbers.
B. The TN format is automatically converted to the large system format of Card-Unit for all assigned
Terminal Numbers
C. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all
new programmed Terminal Numbers
D. The format is automatically converted to the large system format of Loop-Shelf-Card-Unit for IP
phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.
Answer: A
QUESTION 56
A technician deployed a Communication Server 1000E with dual homing feature configured. Both the T and 2T ports are connected on the media Gateway Controller (MGC) one connection is active to avoid network loops.
Which two statements are true, if the connection to the active port on the MGC is host? (Choose two)
A. The MGC will issue a link down error.
B. The MGC will switch to the active pert.
C. The MGC and CPPM will have no loss of service.
D. The MGC will switch to the active port after 12 seconds.
Answer: BC
QUESTION 57
A customer has deployed a Communication Server 100 Rls. 7x system at their site. The technician has been asked to add the Call pickup feature to the 100 IP telephone in the sales department. The customer wants to be sure active calls not lost when the changes are made.
Which Phones Configuration feature can be enabled that will ensure changes to the telephone are not transmitted to the call server until the telephone are busy?
A. Bulk change
B. Courtesy change
C. Group change
D. Template change
Answer: B
QUESTION 58
A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories. A technician logs into Elements manager to complete the configuration,
after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.
What is expected outcome from the system?
A. The node file will be transferred from Signaling Servers to the call servers, and INI files will be
transferred from the call server to the selected servers.
B. The node file will be transferred from Call Servers to the Signaling servers, and the INI files will
be transferred from the Call Servers to the selected servers.
C. The node file will be transferred from Signaling Servers to the Call Server, and the INI files will
be transferred from Call Servers to the Signaling servers.
D. The node will be transferred from Element manager to the call server, and INI files will be transferred
from Element manager to Call Server.
Answer: B
QUESTION 59
A customer wants to deploy an Avaya Server (CS) 1000 Rls. 7x system in Avaya Aura solution.
They plan to have the system support 50,000 users.
Which system type will meet the customer’s needs?
A. CS 1000E Co-Resident Call Server and Signaling Server
B. CS 1000E Standard Availability (SA)
C. CS 1000E High Availability (HA)
D. CS 1000E High Scalability (HS)
Answer: D
QUESTION 60
You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.
A. SFTP must be disabled in LD 117.
B. Valid telephony accounts must already exist in Subscriber Manager.
C. The CS 1000E Call Server must be joined to security domain.
D. Centralized authentication must be disabled.
Answer: C
…go to http://www.lead2pass.com/7003.html to download the full version Q&As.
